Projecta Touchscreen: Understanding the Main Screen

Projecta Touchscreen: Understanding the Main Screen

In this video, we walk you through the main home screen of the Projecta touchscreen and show you the key information you can see at a glance.

  1. Check your battery state of charge in the centre of the screen.
  2. View battery details including voltage, current, and estimated time remaining.
  3. See your current charging sources, including solar, alternator, and AC mains when connected.
  4. Check water tank levels and gas bottle status where fitted.
  5. Use the icons down the left-hand side to move between the home, loads, sensor, alarm, and settings pages.
  6. Use this screen as your main system overview before heading into the other menus.
Check out the other 3 videos in this series:

    • Related Articles

    • Projecta Touchscreen: Understanding the Alarm Screen

      In this video, we show you how to use the alarm screen and what to do when an alert appears. If the alarm icon is grey, there are no current alarms. If the alarm icon turns red, press it to open the alarm page and view the warning. Check the screen ...

    • Projecta Touchscreen: Screen Settings and Renaming Buttons

      In this video, we take you through the settings page and show you how to personalise the touchscreen for your van. Press the settings icon to open the settings menu. Go to the load definition section to rename buttons and match them to the items ...

    • Projecta Touchscreen: Loads Screen and Button Functions

      In this video, we take a look at the loads screen and explain what the labelled buttons control on your van. Press the loads icon to open the page that controls your connected items. Use the on-screen buttons to switch fitted loads on or off, such as ...

    • Mains Water Connection and Filling Fresh Water Tanks – Basic Operation

      Your Mars van can generally be used in two ways for water: Mains water – when connected directly to a park or site tap. Tank water – when using the van’s onboard fresh water tanks and pump. Connecting to Mains Water Locate the mains water inlet on ...

    • Truma UltraRapid Hot Water System – Basic Operation

      The Truma 14L hot water system gives you stored hot water for washing, showering and general use around the van. Depending on your setup, it may run on gas, 240V power, or both together. Before You Turn It On Make sure the hot water system is filled ...